{"product_id":"futaba-telemetry-system-airspeed-sensor-ebb-1176-sbs-01tas-e-top","title":"Futaba Telemetry System  Airspeed Sensor EBB1176 SBS 01TAS E TOP","description":"\u003cp class=\"detail-desc-decorate-title\" data-spm-anchor-id=\"a2g0o.detail.1000023.i3.25ff27a2bslsuu\" data-mce-fragment=\"1\"\u003eFutaba SBS-01TAS Airspeed Sensor For Rc Airplane Remote Control Planes Rc Fixed-Wing Drone \/ Helicopter Drone Accessories\u003c\/p\u003e\n\u003cp class=\"detail-desc-decorate-content\" data-mce-fragment=\"1\"\u003eDescription:\u003cbr data-mce-fragment=\"1\"\u003eSBS-01TAS designed for use in Futaba telemetry system.\u003cbr data-mce-fragment=\"1\"\u003ePurpose: Airspeed sensor(from air pressure)\u003cbr data-mce-fragment=\"1\"\u003eRange: approximately 15km\/h -600 kmh(9mph -373 mph)\u003cbr data-mce-fragment=\"1\"\u003elength: 195mm[ 7. 68inch]\u003cbr data-mce-fragment=\"1\"\u003eWeight: 16 g[ 0.56 Oz] (with leather and silicone tubes)\u003cbr data-mce-fragment=\"1\"\u003eVoltage: DC 3.7 V-DC 7.4 V\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eThe slot number initially set by the SBS-01TAS is \"16\". This sensor uses a slot. If you need to change the slot number allocation, please refer to your transmitter manual.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eInstallation Method:\u003cbr data-mce-fragment=\"1\"\u003e1. S.BUS2 connecting the SBS-01TAS sensor to the receiver\u003cbr data-mce-fragment=\"1\"\u003ePort. ;\u003cbr data-mce-fragment=\"1\"\u003e2. SBS. -O1TAS is installed inside the aircraft, away from the turbulence of the wind\u003cbr data-mce-fragment=\"1\"\u003eAnd vibrate. Install sensor assembly using double sided tape or equivalent material.\u003cbr data-mce-fragment=\"1\"\u003e3. Face the horizontal mounting of the model. Pinto must be put The tube is installed in a place that is not affected by the propeller flow and is safely installed in a position facing the front and horizontally.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eThe top of the skin must be placed at least 15 mm from the leading edge of the wing. Always check for blockages in the skin hosting.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e4. Use the supplied silicone tube to handle the SBS-OI1TAS sensor component\u003cbr data-mce-fragment=\"1\"\u003eConnected to the picket. According to the actual situation of the aircraft, the silicone tube is cut to a suitable length. Ensure that the silicone tube is not bent and that any bending does not affect the flow import.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eOperation check:\u003cbr data-mce-fragment=\"1\"\u003e1. Connect the sensor unit as shown in the figure.\u003cbr data-mce-fragment=\"1\"\u003e2. Remove the leather cover and develop the transmitter and receiver. After the receiver is connected to the power, the air pressure sensor on the SBS-01TAS will be immediately Initialized, so the LED indicator is red. After the air pressure sensor is Initialized, the LED lamp becomes green and the transmitter screen displays 0km\/h.\u003cbr data-mce-fragment=\"1\"\u003e3. During the initialization process, do not let the wind blow to the skin or expose the skin to the wind(at least 2 seconds).\u003cbr data-mce-fragment=\"1\"\u003e4. The SBS-01TAS sensor will begin to measure the change between the total pressure and the static pressure to show the calculated airspeed. Incorrect readings will be given if the Peri-managed component is moved or exposed to wind or moving air during initialization.\u003cbr data-mce-fragment=\"1\"\u003eFollow the instructions above _ to ensure accurate readings. In accidental cases, because of different atmospheric conditions, the AirSpeed obtained may not be accurate. In this case, reboot the system power to allow the sensor to reset.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eWarning:\u003cbr data-mce-fragment=\"1\"\u003eFailure to comply with these security measures can cause serious harm to yourself and others.\u003cbr data-mce-fragment=\"1\"\u003e1. Use SBS-. 01TAS airspeed sensor to be connected to FUTABA has an S.BUS2 port with a telemetry receiver.\u003cbr data-mce-fragment=\"1\"\u003e2. If connected to the S.BUS port or other channel port, the SBS-O1TAS will not work properly.\u003cbr data-mce-fragment=\"1\"\u003e3. Make sure that the component is correctly connected to the receiver and incorrectly connected May cause damage to the sensors.\u003cbr data-mce-fragment=\"1\"\u003e4. Secure sensors on the aircraft using a sponge double-sided adhesive. As with other electronic components, in order to extend the SBS-O1TAS system For the useful life and improve its performance, appropriate preventive and protective measures should be taken.\u003cbr data-mce-fragment=\"1\"\u003e5. Ensure that the assembly is installed in an insulated fuel, water, and vibration Area.As with other electronic components, in order to extend the BS-01TAS systemFor the useful life and improve its performance, appropriate preventive and protective measures should be taken.\u003cbr data-mce-fragment=\"1\"\u003e6. To ensure the normal operation of BS-01TAS, please conduct appropriate tests.\u003cbr data-mce-fragment=\"1\"\u003e7. Please do not fly until the inspection is complete.\u003cbr data-mce-fragment=\"1\"\u003e8. Allow the SBS-O1TAS cable to be properly relaxed and secure its cable in a suitable position to prevent any damage caused by vibration during flight.\u003cbr data-mce-fragment=\"1\"\u003e9. Use only the skin hosting and silicone tubes provided in the package.\u003cbr data-mce-fragment=\"1\"\u003e10. Do not use SBS-01TAS outside the remote control model.\u003c\/p\u003e","brand":"Futaba","offers":[{"title":"Default Title","offer_id":52848529277060,"sku":"04419","price":13370.0,"currency_code":"INR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0357\/0558\/5796\/files\/11_bdecdc3e-ddc4-430b-930e-10251eda6cda.jpg?v=1789833945","url":"https:\/\/www.havocmarket.com\/products\/futaba-telemetry-system-airspeed-sensor-ebb-1176-sbs-01tas-e-top","provider":"Havoc Market","version":"1.0","type":"link"}