FUTABA RADIO T18SZ MODE II WITH RECEIVER R3006SB

Futaba 18SZ 18-Channel FASSTest, FASST, T-FHSS, S-FHSS Computerized Radio Control Transmitter with Telemetry and R7008SB Receiver-Airplane Version - Futaba 18 Channel Radio - Futaba Radio 18 Channel

FEATURES

FASSTEST SYSTEM:
The 18SZ transmitter has adopted the bidirectional communication system “FASSTest”. Data from the receiver can be checked in your transmitter. FASSTest is a maximum 18 channels 2.4 GHz dedicated system.

COLOR TOUCH SCREEN LCD:
T18SZ has an HVGA 4.3 inch, full-color backlit LCD touch screen. The screen is transflective which enables both indoor and outdoor visibility.

S.BUS2 SYSTEM:
By using the S.Bus2 system multiple servos, gyros and telemetry sensors are easily installed with a minimum amount of cables.

MODEL TYPES:
Multicopter. 8 swash types are available for helicopters. 7 types of main wings and 3 types of tail wings are available for airplanes and gliders. Functions and mixing functions necessary for each model type are set in advance at the factory.

LIFE BATTERY:
The 18SZ is operated by a 6.6 V/2,100 mAh Lithium Ferrite battery.

SD CARD (SECURE DIGITAL MEMORY CARD) *NOT INCLUDED:
Model data can be saved to an SD card (SD: 32MB – 2GB, SDHC: 4GB-32GB). When T18SZ transmitter software files are released, the software can be updated by using an SD card update.

EDIT BUTTON:
Two edit buttons are provided, and the operating screen can be immediately “Returned” to the HOME screen during operation. Setting operation can be performed easily by combining this button with a touch sensor.

VIBRATION FUNCTION:
Selects a function that alerts the operator to various alarms by vibrating the transmitter in addition to sounding a buzzer.

SPEECH FUNCTION:
A function is equipped which allows the system to provide telemetry data audibly. This function can also be utilized with commercially available earphones.

CONTENTS

YOUR T18SZ INCLUDES THE FOLLOWING COMPONENTS:

• -T18SZ Transmitter (Air Versionincludes ratcheting throttle, Helicopter Version includes smooth throttle)
• - RECEIVER R3006SB
• -FT2F2100BV2 LiFe Battery* and Charger
• -Switch Harness
• -Mini Driver

*NOTE: The battery in the T18SZ transmitter  already attached to the battery connector. Please connect the battery connector before use.

TRANSMITTER SPECS

TRANSMITTER FREQUENCY:
2.4 GHz band

SYSTEM:
FASSTest18CH, FASSTest12CH, FASST MULT, FASST 7CH, T-FHSS, S-FHSS, switchable

POWER SUPPLY:
6.6 V FT2F2100BV2 LiFe battery

FREQUENCY BAND:
2.4 GHz

RF POWER OUTPUT:
100mW EIRP

RECEIVER SPECS

R7014SB

SIZE:
50.2 mm x 37.0 mm x 15.9 mm
1.98 in x 1.45 in x 0.63 in

WEIGHT:
20.8 g
0.73 oz

POWER REQUIREMENTS:
DC 3.7V~7.4V

VOLTAGE RANGE:
DC 3.5V~8.4V

 R7008SB

SIZE:
24.9 mm x 47.3 mm x 14.3 mm
0.98 in x 1.86 in x 0.56 in

WEIGHT:
10.9 g
0.38 oz

POWER REQUIREMENTS:
DC 3.7V~7.4V

VOLTAGE RANGE:
DC 3.5V~8.4V